AMI UKPX10+H2310 Pillow Block Bearings

s:4.1 mm; r1s (min):3 mm; d2:220 mm; b1:mm; b:mm; d2 (max):mm; F:250 mm; rs (min):3 mm; Static (Coa):694 kN; Pu:62.140 kN;

R1:79.375 mm; ba:53.975 mm; A2:190.5 mm; P180°:107 kN; P60°:249 kN; End plug (suffix Y):EPR 27; Initial grease fill:379.89 g; H:257.175 mm; PG:1/4 NPT; Eye bolt:2 x 3/8-16 UNC;

Oil Speed Rating Open/Shielded n2:3400 rpm; Sealed Speed Rating n3:2000 rpm; D:225.0000 mm; Accessories:Two Seals; Grease Speed Rating Open/Shielded n1:2800 rpm; Oil Speed Rating n2:3400 rpm; Basic Dynamic Radial Load Rating C:182000 N; Grease Speed Rating n1:2800 rpm; Basic Static Radial Load Ratin

Specific dynamic load factor K:100 N/mm²; l1 min.:86 mm; Basic static load rating C0:140 kN; l2 max.:199 mm; h:150 mm; B:28 mm; α:6 °; d2 max.:94 mm; d:40 mm; Mass rod end:1.85 kg;

D:650 mm; with tapered bore:240 min-1; Static (Cor):22.3 mm; Dynamic (Cr):12 mm; Oil:822.160 kN; with cylindrical bore:180 min-1; d:400 mm; Grease:11150 kN; Pu:5410 kN; B:250 mm;

B:39.70 mm; D:125.0000 mm; Sealed Speed Rating n3:3200 rpm; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:101000 N; Accessories:Shield & Seal; Fillet Radius ra:1.50 mm; d:70.000 mm; Oil Speed Rating n2:4300 rpm; Basic Static Radial Load Rating Co:125000 N;

Grease Speed Rating Open/Shielded n1:2800 rpm; Accessories:Two Seals; D:210.0000 mm; B:28.00 mm; d:150.000 mm; Basic Dynamic Radial Load Rating C:88400 N; Sealed Speed Rating n3:1800 rpm; Oil Speed Rating Open/Shielded n2:3400 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:93000 N

D:140.0000 mm; Fillet Radius ra:2.00 mm; d:55.000 mm; B:66.00 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:178000 N; Grease Speed Rating n1:3600 rpm; Oil Speed Rating n2:4600 rpm; Basic Static Radial Load Rating Co:156000 N;

E:116.99 mm; s max.:4 mm; Fatigue load limit Pu:29 kN; Calculation factor Y:0.4; B:34 mm; Calculation factor kr:0.3; Basic dynamic load rating C:165 kN; d1 ≈:95 mm; Basic static load rating C0:228 kN; das:92 mm;

Mass bushing:11.1 kg; Coefficient of friction µ max.:0.15; Permissible sliding velocity v min.:0 m/s; Specific static load factor K0:45 N/mm²; α:124 °; a:10 mm; d:190 mm; h:192 mm; D:210 mm; B:200 mm;

P150°:2400 kN; Ca:192 mm; Q120°:4200 kN; s:30 mm; Labyrinth seal:2 x TS 80; P0°:6000 kN; Q150°:2400 kN; J:840 mm; Taconite seal:2 x TK 80; Adapter sleeve:OH 3080 H;

M:6 mm; Basic static load rating C0:5400 kN; B:115 mm; d:120 mm; Lubricant:Regular relubricatio; Basic dynamic load rating C:1080 kN; ra max.:1 mm; α:16 °; C:70 mm; Da min.:180 mm;

da max.:7.3 mm; Reference speed:110000 r/min; C:1.1 mm; r1,2 min.:0.15 mm; D:13 mm; B:5 mm; Basic static load rating C0:0.224 kN; da min.:7.2 mm; Basic dynamic load rating C:0.618 kN; Fatigue load limit Pu:0.01 kN;

B:13.00 mm; Basic Static Radial Load Rating Co:5400 N; Grease Speed Rating n1:17000 rpm; Oil Speed Rating n2:20000 rpm; Oil Speed Rating Open/Shielded n2:20000 rpm; d:15.000 mm; D:42.0000 mm; Sealed Speed Rating n3:12000 rpm; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:1700

d:75.000 mm; Oil Speed Rating n2:3600 rpm; Fillet Radius ra:2.00 mm; D:160.0000 mm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; B:71.40 mm; Basic Dynamic Radial Load Rating C:187000 N; Basic Static Radial Load Rating Co:208000 N; Accessories:Shield & Seal;