KAWASAKI 705-95-07020 HM Series Pump

Recommended tightening torque for set screw:11.5 Nm; r:1.1; d1:51.1 mm; B:25.4 mm; C:17 mm; Weight:0.5 kg; S:9.5 mm; C1:5.7 mm; T max.:200 °C; T min.:-20 °C;

Designation of bearing:ES210G2; H2:165 mm; B1:43.7 mm; d:50 mm; H1:22 mm; L1:65 mm; d1:67.2 mm; N1:25 mm; s1:33.4 mm; N:20mm;

Rating life coefficient, A2:1.4; Dynamic load, C:119 kN; Nlim (grease):3,200 rpm; Nlim (oil):4,300 rpm; Product Group:B04334; Characteristic cage frequency, FTF:0.44 Hz; Max operating temperature, Tmax:120 °C; e:0.4; Y0:0.82; Weight / Kilogram:0;

N1:19 mm; SW:3.97 mm; A2:33 mm; d:38.1 mm; A1:16 mm; G:M6x1; A5:19.2 mm; L1:88 mm; B:30.2 mm; Designation of bearing:ES208-24G2;

Characteristic outer ring frequency, BPF0:3.09 Hz; Da max:177 mm; Max operating temperature, Tmax:110 °C; d:90 mm; f0:13.3; da max:118 mm; ra max:2.5 mm; Characteristic rolling element frequency, BSF:4.18 Hz; rs min:3 mm; da min:103 mm;

A2:61.5 mm; B:45.3 mm; H:222 mm; A1:15 mm; Designation of housing:FLE211N-; G:R1/8"; s1:22.65 mm; C:43.55 kN; T max.:100 °C; L:134 mm;

Bearing Inner Ring Material:Steel; Housing Material:Cast Iron; Bearing Series:210 Series; Seal Type:Single Lip; Bearing Duty:Normal Duty; Shaft Attachment (2):Grip Tight; UPC:782475895502; Ship Weight:6.18 LB; Flinger Material:Steel; Ball Bearing Housing Series:210 Series;

Recommended tightening torque for set screw:3.7 Nm; s1:15.5 mm; G:R1/8"; Weight:0.7 kg; N:11,5mm; Designation of bearing:UC202-10G2L3; T min.:-20 °C; C0:6.65 kN; d:15.88 mm; T max.:100 °C;

d:75 mm; F:85 mm; B:30 mm; Lubrication hole on inner ring:Non/No; da min:80 mm; ras max:1 mm; Brand:NTN; t:2.2 mm; rs min:1 mm; Precision class:P0;

Weight:1.18 kg; C:19.5 kN; B1:35.7 mm; L:108 mm; A2:46.7 mm; d1:44.1 mm; s1:27.8 mm; d:30 mm; Recommended tightening torque for set screw:11.5 Nm; B:23.8 mm;

A:36 mm; T min.:-20 °C; A2:44.5 mm; Weight:1.54 kg; Designation of closed end cover:SCC207; Z:50.7 mm; L:118 mm; B:32 mm; T max.:100 °C; C:25.7 kN;

S:19 mm; B:51.6 mm; A2:54.6 mm; e:22 mm; G:M6x1; A:40 mm; J:157 mm; Weight:2.32 kg; d:49.21 mm; Z:59.8 mm;

End Cap Groove:No; Max Bearing Speed:7500 rpm; Grease Type:Unirex N2; Housing Coating:Powder Coat; Ball Material:Steel; Shaft Attachment (2):Set Screw; Bearing Series:204 Series; Self Aligning:Self Centering; Housing Type:Narrow Slot Take-Up; Seal Type:Single Lip;

A1:9.5 mm; s1:34.1 mm; H3:80; C:19.5 kN; G:M6x1; B1:48.3 mm; J:100 mm; T min.:-40 °C; Weight:1.13 kg; Designation of housing:FCE206-;

G:R1/8"; T max.:100 °C; d:25 mm; A:36 mm; Dz:60 mm; Recommended tightening torque for set screw:5.5 Nm; H:36.5 mm; Designation of open end cover:SCO205-25; A1:21 mm; Z:47.3 mm;